Öffne unsere coole APP!

Genieße App-Exklusive Deals.

Öffne APP
BFight 210 210mm Bürstenlose FPV Renndrone
BFight 210 210mm Bürstenlose FPV Renndrone
BFight 210 210mm Bürstenlose FPV Renndrone
BFight 210 210mm Bürstenlose FPV Renndrone
BFight 210 210mm Bürstenlose FPV Renndrone
BFight 210 210mm Bürstenlose FPV Renndrone
BFight 210 210mm Bürstenlose FPV Renndrone
1/1

BFight 210 210mm Bürstenlose FPV Renndrone - SCHWARZ UND BLAU BNF FRSKY

164.94€
186.37
69 Rezensionen

Gutschein:

Angebot:

Unterstützt Nachnahme Zahlung

Lager & Gebühren

Wählen
CN-099:Versand zwischen: Feb 21 - Feb 23

Produkt Optionen

Wählen
SCHWARZ UND BLAU BNF FRSKY
Shop besuchen

Rezensionen (69)

passerbyeus@yahoo.com
24/04/2018 01:52:48
Ok they must have fixed all the issues with this one. Mine come with Frysky xm+ receiver bind on D16 so the document needs to be updated. There was no wire out of place like the older models. Mine also is not just one full frame peice , you can swap the arms. Flys like a champ. Flash props even. At this price it's a deal...
Mehr anzeigen

Beschreibung

Beschreibung:

BFight 210 210mm FPV Rennen Drone bietet die ordentliche Struktur, einfache Wartung und die Ferneinstellung von Frequenz / Band. Der Flugregler und der Videosender sind getrennt, was für die Wärmeableitung und die hohe Leistung gut ist. Der Multirotor hat vier unabhängige Arme, so dass es praktisch ist, einen von ihnen zu ersetzen. Noch wichtiger ist, wenn der Empfänger SBUS unterstützt, dürfen Sie die Frequenz / das Band direkt mit dem Funksender in Ihrer Hand ändern. Mit BFight 210 wird FPV-Rennen sicherlich mehr Spaß machen.


Haupteigenschaften:

● Ordentliche Struktur und gute Wärmeableitung mit 3 PCB Boards von Flugregler, 4-in-1-ESC und Video-Sender in der Mitte

● 4 mm dickes 3K-Kohlefaser-Chassis besteht aus 4 unabhängigen Armen, was die Wartungsfreundlichkeit erhöht

● 4-in-1 BLHeli - S 30A ESC unterstützt Oneshot, MultiShot, die neuesten DShot-Digitalsignale sowie Firmware-Updates

● 5,8G 40CH Echtzeit FPV, mit MICRON CCD Kamera, 1km Bildübertragungsreichweite, Ferneinstellung der Frequenz / Band (Empfänger SBUS Unterstützung erforderlich)


Spezifikationen:

Radstand: 210mm

Gewicht: 267g

Größe: 178 x 178 x 38 mm (ohne Propeller)

Rahmenmaterial: 3K Kohlefaser

Bodenplattenstärke: 4mm

Deckplattendicke: 1,5 mm

Flugcontroller: OMNIBUS F3 Pro mit OSD

Bürstenloser Motor: F2205 2300KV

Brushless Regler: 4-in-1 BLHeli - S 30A

Propeller: Gemfan 5152 Dreiblatt

Kamera: HS1177, 650TVL (schwarz und weiß), 600TVL (Farbe)

Bildsensor: 1/3 Zoll Super HAD II CCD

Videosender: 5,8G 40CH 25mW / 200mW

Stromversorgung: 11,1 - 14,8V (3 - 4S LiPo)


OMNIBUS F3 Pro Flight Controller

Prozessor: STM32F303 MCU

IMU: MPU6000 SPI

Barometer: BMP280

Integriertes BEC: Ja

Unterstützte microSD-Karte: bis zu 32 GB


4-in-1 BLHeli - S 30A ESC

Hauptprozessor: EFM8BB2F16G

Treiber: FD6288 MOSFET

Erweiterbar: Ja

Dauerstrom: 4 x 30A

Burststrom: 4 x 35A


960H Kamera

Bildsensor: 1 / 2,7 Zoll CCD

Auflösung: D1, 960H

Linse: 2,5 mm

TV-System: PAL / NTSC (einstellbar über OSD)

Mindest. Beleuchtung: 0,001 Lux

Stromversorgung: 5 - 17V DC



Hier klicken , um mehr über die Auflösung zu erfahren.
Klicken Sie hier , um die Bedienungsanleitung der FPV-Kamera herunterzuladen.

Verschiedene Versionen:

PNP: ohne Empfänger

BNF DSMX: Enthält DSMX Pro-Empfänger, kompatibel mit DSM2- und DSMX-Protokoll. 500m Entfernung erhalten

BNF FrSky: enthält FrSky Pro 8-Kanal-Empfänger, kompatibel mit D8-Modus, unterstützt SBUS (Standard) und PPM. 500m Entfernung erhalten

BNF FLYSKY AFHDS: enthält FLYSKY AFHDS PPM Empfänger, kompatibel mit AFHDS Sender. 500m Entfernung erhalten

BNF FLYSKY AFHDS 2A: enthält FLYSKY AFHDS 2A Empfänger, kompatibel mit AFHDS 2A Sender. 500m Entfernung erhalten


Hinweis:

Die Farben (schwarz, blau, rot, pink und transparent) des Propellersets werden nach dem Zufallsprinzip versandt.


Vermessung und Gewicht

Daten

Typ: Rahmen Kit
Version: BNF

Motor

Modell: F2205
Motortyp: Bürstenlosen Motor
KV: 2300

Flugsteuerung

Flight Controller Typ: F3

Kamera

Videoauflösung: D1, 960H
Sensor: CCD

Elektronischer Geschwindigkeitsregler

Firmware: BLHeli-S
Funktionen: DShot150,DShot300,DShot600,Dauerfeuer,Oneshot125,Oneshot42

Vermessung und Gewicht

Produktgewicht: 0,2670 kg
Verpackungsgewicht: 0,5200 kg
Produktgröße (L x B x H): 17,80 x 17,80 x 3,80 cm / 7,01 x 7,01 x 1,5 Zoll
Verpackungsgröße (L x W x H): 26,00 x 20,00 x 7,00 cm / 10,24 x 7,87 x 2,76 Zoll

Verpackungsinhalt

Verpackungsinhalt: 1 x Drone, 4 x Ersatz Propeller, 1 x Batterieband

BFight 210 210mm Bürstenlose FPV Renndrone- Black and Blue BNF FRSKY

BFight 210 210mm Bürstenlose FPV Renndrone- Black and Blue BNF FRSKY

BFight 210 210mm Bürstenlose FPV Renndrone- Black and Blue BNF FRSKY

BFight 210 210mm Bürstenlose FPV Renndrone- Black and Blue BNF FRSKY

BFight 210 210mm Bürstenlose FPV Renndrone- Black and Blue BNF FRSKY

BFight 210 210mm Bürstenlose FPV Renndrone- Black and Blue BNF FRSKY


Produktsicherheit:
Wir übernehmen keinerlei Verantwortung oder Haftung für jegliche Zweckentfremdung mit diesem Produkt oder anderen Produkte. Alle unsere Produkte wurden ausgiebig von uns getestet und halten auf die strikte QC-Standards. Für bestimmte Produkte (z.B. Spielzeuge, Messer, usw.) empfehlen wir angemessene Beaufsichtigung und Kontrolle, da wir keine Verantwortung für Zweckentfremdung und Unfällen übernehmen werden.

Haftungsausschluss der Produktfarbe und -stil:
Die Farbe und der Stil (oder das Muster) des Produktes hängt vom Vorrat ab. Wir behalten uns das Recht vor, eine Farbe / ein Muster gegen eine andere Farbe / ein anderes Muster auszutauschen.

EMPFOHLENE PRODUKTE

GESPONSERTE PRODUKTE

Bonus für Neues Mitglieder: $50 Gutschein
164.94€

BFight 210 210mm Bürstenlose FPV Renndrone

Farbe

Größe

Anzahl - +
Ratenzahlungen: auswählen
loading...
loading...
Abbrechen
loading...
loading...
loading...

Rezensionen

4.65 *****
  • 46
  • 22
  • 1
  • 0
  • 0
  • Alle ( 69 )
  • ( 39 )
  • ( 11 )
passerbyeus@yahoo.com
24/04/2018 01:52:48
Ok they must have fixed all the issues with this one. Mine come with Frysky xm+ receiver bind on D16 so the document needs to be updated. There was no wire out of place like the older models. Mine also is not just one full frame peice , you can swap the arms. Flys like a champ. Flash props even. At this price it's a deal...
Vorschlag:
Like to seen a micro cam on it but the stock cam will do great..
Bfight 210
15/02/2018 09:50:41
I am loving this drone !! it's great !! for the price I paid this drone is perfect for 210mm size, he is great for freestyle and HD filming with a small camera mounted on top of it, he has great punch, great precision and is really stable
Vorschlag:
the camera could be better/lighter, and the receiver is not great, the antenna is really short and the range is not really good, needs an upgrade with a better one
Dacruze
13/01/2019 10:44:34
Not a bad drone. It’s a ready to fly purchase, for cheap. You get what you pay for. I’m sure I’ll figure that out myself as well. I received it within about 3 weeks. The packaging could have been a little better. Came in a generic cardboard box, no graphics, and foam holding the drone. It has instructions on various parts but not a parts list with specific part models in case of replacement. I bought the pnp no receiver option. It’s smaller than you think. Came with gemfan props, clear and black (mine did). Once I get it in the air, I’ll be able to see more about how well it flies. It’s just something to get me in the air for now.

Pro: price. Small. Looks well built and frame isn’t too heavy/clunky. Clean wire management. On screen display.

Con: it’s got a small bay for your stack. Which in turn makes the top and bottom plate also small. So you can either mount a battery on top. Or a go pro on top but battery on the bottom. No room to put both on top. Also battery straps included were super cheap, and small. But that is also because another con, they gave you practically no room to feed a strap through for the battery or an action camera. Also the fpv cam sticks out of the stack bay; so if you hit a pole or something that will get between the two front arms and get to the camera; it’ll most like break the camera or at least severely damage it. I would replace with a micro cam.

Would recommend for a friend for sure though.
Lee
16/07/2018 02:40:23
I was flying my quad in the park yesterday and sometimes I admit I fly in the streets in traffic. This is in a public park where tons of pedestrians walk interspersed with vehicle traffic and nobody seems to mind us playing with our toy drones in the park. Well, some ahole was driving and I pulled my quad in front of his truck preparing to get out of his was by pitching forward and throttling up to achieve maximum speed. This guy hit the gas and ran his bumber into my quad. This was a big Toyota Tacoma and I know that he saw it before hitting it therefore he did this on purpose because he's a jerk, because we had words after and he actually apologized for what he did. Since he did apologize, I just let him leave the park. My BFight survived the encounter intact so I'm not gonna hurt this prick. The quad flies smooth as hell and it's pretty fast too. I suppose the pickup truck hitting the damn thing (and it surviving without a scratch) speaks to durability as well. I can recommend this as a second quad for those who are already hooked. It is a step in the right direction for noobs advancing on to intermediate pilot status! Like me!!!
Vorschlag:
It was hard to hit the bind button. I used a stick.
Stefan
16/01/2018 10:56:35
This is my 2nd racequad and I am absolutely impressed. Great quality, ligthweight build and good components. Only thing you have to change is the receiver when you fly with FrSky. The built in receiver ist just one for Tinys and has a maximum range of around 100m. Got a few failsaves on my maiden flight. Changed the receiver to a XM+ and now I have great range. Just fun to fly this one around. Unfortunately I broke my camera lens on one of the first crashes but that was no fault of the quad. Great quad for beginners of FPV flying as it is quite durable and very light.
Vorschlag:
FrSky receiver is not suitable for a quad like this. With only 100m range you should change it.
David
24/06/2018 01:50:42
it's amazing for the price.. very stable in flight and enough power to do what you want it to do. loops rolls and flips very smooth with stock pids. comes with 2 pair of props.

for some reason I lost connection with the drone and it just kept going, and crashed somewhere.. I'm still looking for it.. should have changed it the Rx to xm+ or a r-xsr so I'm buying another one. but with a better Rx.

from now on I'm strapping a GPS tracker to every quad I Fly for now on..
Vorschlag:
at about 100m my Rx fail-safed and it tumbled to the ground, must have hot just right the front two arms Broke off, after fixing those, it fail-safed again, and flew away.
BFIGHT 210 PNP
06/12/2017 14:55:38
a really great deal on a sweet 5 inch light weight quad. ive read so many reviews and watched so many videos that i had to try this out for myself..very impressed.

..great power..fun to fly..easy to work on..great props included..very easy to learn tuning and betaflght since it is hard to bring out any bad tendencies..
Vorschlag:
the camera aspect ratio is bad for me..maybe because i am used to a different ratio

no frame or spare parts are available.

needs a better battery strap and some velcro on the bottom for safety
koki
23/02/2018 13:22:09
This is more than i expected, the frame is light but is very durable, the build quality is great, the soldering is done professionally, there is very little few things to tweak before flight and you have a perfect quad.
Vorschlag:
Everything is super, no cons.
Phil
24/04/2018 02:14:41
It files great with so much power with 4s 1300mAh batteries. Very smooth in the air.

AFHDS 2A receiver it came with performed nicely with my FS-I6 radio. I haven't done the range test but 200m was not a problem.

Craft is considerably lightweight and I would recommend it to anyone starting FPV.
Vorschlag:
Camera could be better. I had some trouble viewing the screen when I was facing towards the sun. Screen was kinda washed out when facing sun.
Vincent Fischer
19/09/2017 15:41:38
It's very light and silent. It runs very good with stock PIDs. Build quality is good (except the motor wires soldered to the 4in1 ESCs. they look like balls, made by someone with zero solder skills). I dislike some things on this model very much but still don't regret that I bought it. Overall experience is decent.
Vorschlag:
I think this one is a bit over hyped. It's light but still pulls a bit too much current with the provided props. Also the micro DSMX receiver does not have diversity and the receiver antenna length is a bad joke. Without diversity and surrounded by carbon, prepare for some failsaves (you should be used to this if you use Spektrum :P). This kind of receivers is for micros and not for a full sized mini kwad imho. (Better buy the PNP and provide your own diversity RX with proper antennas)
The camera is some weird aspect ratio and looks very stretched on standard 4:3 goggles. Also you have to disassemble the frame to reach the OSD joystick.
The implementation of the VTX remote switching is just plain dangerous. It can happen that you change channel midflight. I would recommend to pull the S.Bus wire out of the connector that goes to your VTX.
Last but not least...what were they thinking when they chose these battery straps. They are just awful but there are no cutouts for better straps. You have to use these thin ones that are not even real velcro. They just don't work (atleast for me). I think i will dremel away some parts of the top plate to make bigger straps fit.
Don't let you discourage by the many negatives I wrote, I still like this model.
Mehr anzeigen
Mehr anzeigen
Mehr anzeigen